Read-only FM1 firmware identity and BEETLE application check. Nothing is uploaded, erased, written, installed or flashed.
Use Chrome or Edge on desktop and connect the FM1 via USB-C. Close other MIDI applications. Keep BEETLE running normally; do not enter update mode.
Not connected.
No queries sent.
If the device replies to BEETLE's read-only 0x50 HELLO with 0x60, the BEETLE application is running. If the Hub simultaneously calls it another firmware's update-loader, that points to Hub-side classification or port identification, not proof that the loader is actually running. If the application handshake is absent, we cannot tell from identity alone whether another loader is active or USB traffic was interrupted.
Before changing firmware, back up all projects and verify a recovery path. See the Firmware Hub knowledge base. Do not share private full-flash dumps.
BEETLE V1.4.13 · Package identity FM-1_2123 · diagnostic transport only